Though Glock pistols are known for their reliability, they do require maintenance and cleaning to keep them in top condition. Learning how to take apart a Glock is a necessary step to ensure the gun is properly maintained and cared for. In this article, we’ll be discussing the steps involved in taking apart a Glock in 2023. Read on to learn more about this process.
Before You Start
Before you begin taking apart a Glock, there are a few things you need to gather. First and foremost, you’ll need a Glock pistol, which should come with a factory-made instruction manual. You’ll also need a soft cloth, a small Phillips screwdriver, and a pair of pliers. Additionally, if you don’t already have the tools, you’ll need to purchase a punch and a flathead screwdriver.
Steps To Take Apart A Glock
Now that you have all the necessary items, you’re ready to start taking apart the Glock. Follow the steps below to get the job done quickly and efficiently.
Step 1: Remove The Magazine
First, you’ll need to remove the magazine from the gun. To do this, press the magazine release button, located on the left side of the gun, and remove the magazine. Set the magazine aside in a safe place.
Step 2: Remove The Slide Stop
Next, you’ll need to remove the slide stop. This is the small metal rod located at the rear of the frame. To remove it, you’ll need to use the flathead screwdriver. Insert the screwdriver into the pin hole and turn it counter-clockwise until it is removed.
Step 3: Remove The Slide
Now, you’re ready to remove the slide. To do this, simply pull back on the slide and lift it off the frame. If it does not come off easily, use the punch to push the slide forward until it is removed.
Step 4: Remove The Barrel
Once the slide is removed, you can now remove the barrel. To do this, use the Phillips screwdriver to unscrew the two screws located at the front of the frame. Once the screws are removed, the barrel can be easily removed.
Step 5: Remove The Recoil Spring
Next, you’ll need to remove the recoil spring. To do this, use the pliers to pull back on the spring until it is removed.
Step 6: Remove The Recoil Spring Guide Rod
The recoil spring guide rod is located at the front of the slide. To remove it, use the punch to push it out of the slide.
Step 7: Remove The Trigger Assembly
The trigger assembly is located at the rear of the frame. To remove it, use the flathead screwdriver to loosen the two screws located on the trigger. Once the screws are removed, the trigger can be easily removed.
Step 8: Remove The Firing Pin
The firing pin is located inside the slide. To remove it, use the pliers to pull it out of the slide. Be careful not to damage the firing pin while removing it.
Step 9: Reassemble The Glock
Now that all the parts are removed, you’re ready to reassemble the Glock. To do this, simply reverse the steps above. Be sure to tighten all the screws securely before reassembling the gun.
Conclusion
Taking apart a Glock is a relatively simple process that can be done in just a few minutes. With the help of this article, you now know the steps involved in taking apart a Glock in 2023. Just remember to be careful when handling the parts and to follow the steps closely.