Graduation is a momentous occasion that you’ll remember for the rest of your life. You want to look your best for the big day, and that includes your graduation gown. Unfortunately, the gown can get wrinkled from being packed away in a bag or box. Don’t worry, though, because there are several ways to get those wrinkles out of your graduation gown in 2023.
Hang or Iron the Gown
The most common way to get wrinkles out of a graduation gown is to hang it up and let the wrinkles naturally fall out over time. You can also use an iron to press out the wrinkles. Before you do this, however, it’s important to read the care label on the gown. Some fabrics can be ironed, while others should not be ironed. If the label says the gown should not be ironed, then you will need to find another way to get the wrinkles out.
Use a Steamer
Another way to get wrinkles out of a graduation gown is to use a steamer. Steamers are efficient tools for getting wrinkles out of fabric, and they are relatively easy to use. The key with steamers is to make sure you keep the steamer at least 6 inches away from the fabric. If you get the steamer too close, it can damage the fabric. It’s also important to make sure you move the steamer in an up and down motion over the fabric.
Bring It to the Dry Cleaner
If you don’t have access to an iron, steamer, or other tools, then you can take the gown to a dry cleaner. Dry cleaners are experienced in getting wrinkles out of fabrics, and they have the right tools to do the job. Just make sure you call ahead and ask if they can get the wrinkles out of the gown. Some dry cleaners may not accept certain fabrics, so it’s best to call ahead.
Hang It in the Shower
One of the least expensive ways to get wrinkles out of a graduation gown is to hang it in the shower. Make sure the water temperature is warm, not hot, and then hang the gown on a hanger in the shower. The steam from the shower will help get the wrinkles out. It may take a few minutes for the wrinkles to come out, but it is a relatively easy and inexpensive way to get the job done.
Use a Hair Dryer
Another way to get wrinkles out of a graduation gown is to use a hair dryer. Make sure the heat setting is on the lowest setting, and then move the hair dryer around the gown. The heat from the hair dryer will help to get the wrinkles out. Just be careful not to get the fabric too hot, or you may damage the fabric.
Put It in the Dryer
If all else fails, you can put the gown in the dryer. Make sure you use the lowest heat setting, and then add a damp towel to the dryer. The moisture from the towel will help to get the wrinkles out. It’s important to check the care label on the gown before you do this, however, as some fabrics should not be put in the dryer.
Conclusion
Getting wrinkles out of a graduation gown can be a challenge. Fortunately, there are several ways to get the job done. You can hang or iron the gown, use a steamer, bring it to the dry cleaner, hang it in the shower, use a hair dryer, or put it in the dryer. Just make sure you read the care label on the gown before you use any of these methods.